![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061043.webp)
39
7
MEMORY/CALL CHANNELS
D
Programming a call channel via the
microphone
The HM-98 microphone can also be used to pro-
gram a call channel.
q
Select the desired band with [BAND].
w
Select VFO mode with [VFO].
e
Set the desired frequency.
• Set other data (e.g. offset frequency, duplex direction, subaudible
tone frequency, etc.), if required.
r
Push [FUNC] then [
E
MW] momentarily to indicate mem-
ory channels.
• Do not hold [MW] for more than 0.5 sec., otherwise the memory
channel will overwrite the selected memory channel.
t
Push [
Y
] or [
Z
] to select the call channel.
• “C” appears when the call channel is selected.
y
Push [FUNC] then [
E
MW] for 2 sec. to program.
D
Transferring call channel contents
The call channels can be transferred in a similar manner to
memory channel transferring.
q
Select call channel with the desired band’s [M/C].
• Push [CHG/L] if [M/C] is not displayed.
• “C” appears when the call channel is selected.
w
Push [
(S.MW)
MW] for 2 sec. to transfer.
• Push [CHG/L] if [S.MW] is not displayed.
D
Transferring call channel contents via the
microphone
q
Select the desired band with [BAND].
w
Push [
(MR)
CALL] for 2 sec. to select the desired band’s call
channel.
• “C” appears when the call channel is selected.
e
Push [FUNC] then [
E
MW] for 2 sec. to transfer.
MW
A