![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061024.webp)
20
4
FREQUENCY SETTING
■
Using the tuning dial
q
Select VFO mode with the desired band’s [V/M
H
].
• Push [CHG/L] if [V/M
H
] is not displayed.
w
Rotate desired band’s [DIAL] to change the frequency.
• The frequency changes according to the selected tuning steps.
See the next page for selecting the tuning step.
D
1 MHz tuning step
Push the selected band’s [V/M
H
] to select 1 MHz tuning step.
Push [V/M
H
] again to return to the previous tuning step.
D
10 MHz and 1 MHz tuning steps
Push the selected band’s [V/M
H
] once or twice to select 10
MHz or 1 MHz tuning step, respectively. Push [V/M
H
] once or
twice to return to the previous tuning step.
Some versions do not have the 10 MHz tuning step.
■
Using the [
Y
]/[
Z
] keys
q
Push [BAND] to select the desired band.
w
Push [VFO] to select the VFO mode.
e
Push [
Y
] or [
Z
] to select the desired frequency.
• The frequency changes according to the selected
tuning steps. (p. 21)
• Pushing [
Y
] or [
Z
] for more than 0.5 sec. activates
a scan. If this happens, push [
Y
] or [
Z
] again to
cancel the scan.
1 MHz or 10 MHz steps cannot be used via the [
Y
]/[
Z
]
keys.
MAIN
SCP
MAIN
SCP
V/M
H
TS
V/M
H
TS
MAIN
12
14
5.___
MAIN
SCP
MAIN
SCP
V/M
H
TS
V/M
H
TS
MAIN
12
14
_.___
While 1 MHz tuning step is
selected, the digits below
100 kHz disappear.
While 10 MHz tuning step is
selected, the digits below
1 MHz disappear.
Y
Z