![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061046.webp)
MEMORY SCAN (p. 45)
Repeatedly scans memory
channels except those set as
skip channels. Used to search
through often-used memories
and for bypassing normally
busy channels such as re-
peater frequencies.
FULL/BAND SCAN (p. 43)
Repeatedly scans all frequen-
cies over the entire band.
Used as the simplest scan
without any preliminary set-
tings necessary.
Band
edge
Band
edge
Scan
Jump
Not yet
programmed
≈
(skip)
ch 99
ch 1
ch 2
ch 3
ch 4
ch 5
ch 6
ch 98
PROGRAMMED SCAN
(p. 43)
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a speci-
fied range such as repeater
output frequencies, etc. 3
pairs of scan edges are avail-
able.
Scan
Jump
Scan edges
Band
edge
Band
edge
SCAN RESUME
CONDITION (p. 46)
4 resume conditions are avail-
able: 3 timer scans and pause
scan. When receiving a sig-
nal, pause scan pauses until
the signal disappears; timer
scans pause for 5, 10 or 15
sec.
Pause
scan
Receiving
a signal
Timer
scan
Pausing
2 sec.
42
9
SCAN OPERATION
■
Scan types
Scanning searches for signals automatically and makes it
easier to locate new stations for contact or listening purposes.
There are 3 scan types and 4 resume conditions to suit your
operating needs.
A tone scan function is available to search for subaudible
tones (e.g. when you want to find a subaudible tone fre-
quency necessary to open a repeater). See p. 53 for de-
tails.