manualshive.com logo in svg

Icom AP-90M, Instruction Manual

Share
Download
Icom AP-90M Instruction Manual Download Page 76

6

MAINTENANCE

6-2

1. Checking and saving the settings

Click [Management], and then click [Settings Backup/Restore].

• The “Settings Backup/Restore” screen is displayed.

1

In the “Settings Backup” menu, click [Backup].

• The file confirmation screen is displayed.

2

Click [ ] by the [Save] button, and then select [Save as].

• The “Save as” window appears.

3

Select the location to save and click [Save].

• The setting file is saved in the selected location.

4

No display of the factory defaults.
Only the changed settings are 
displayed.

Product  name,  version  and  saving 
date are displayed as the file name.

Management > Settings Backup/Restore

You can check the settings changed on the setting screen, and then save them as a setting file (format: sav) 
on your PC or a USB flash drive*.
You can use the saved file as a backup if the settings are lost or damaged.

• Settings files saved on a USB flash drive* can be uploaded to the AP-90M. (

+

p.6-13)

  *User supplied

q

 Click

Click

w

 Select

Summary of Contents for AP-90M








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands