manualshive.com logo in svg

Icom AP-90M, Instruction Manual

Share
Download
Icom AP-90M Instruction Manual Download Page 46

3

CONNECTING TO A WIRELESS LAN (BASIC)

3-14

Wireless Settings > Wireless 2 > Wireless Bridging (WBR)

 Using Wireless 2 (External antenna)

Setting two AP-90Ms (illustration: master (ath4) and client) with the following settings are used as an ex-
ample.

• Refer to “Wireless Bridging function” for conditions to use the function. (

+

p.1-9)

• The client unit channel automatically changes to the master unit channel.

  The channel “036 CH (5180 MHz)” (Wireless 2) is set as default and it is used as the example for this description.

• The client virtual AP (ath7) cannot be used when the wireless bridging function is set.
• The IP address which was set in “Changing the IP address” (

+

p.2-8) is used as an example.

Master 

(

+

p.3-19)

[Wireless LAN] 

Channel: 

036 CH (5180 MHz) (default)

[Virtual AP] 

Interface: 

ath4

     

Virtual AP: 

Enable (default)

     

SSID: 

WIRELESSLAN-0 (default)

[Security] 

Authentication: 

WPA2-PSK

     

Encryption: 

AES

     

PSK (Pre-Shared Key):  wirelessmaster

[Wireless Bridging] Wireless Bridging: 

Enable

     

Operating Mode: 

Master

     

Interface: 

wbr8

     

Client BSSID: 

00-90-C7-00-00-02 (Client BSSID)

     

 

•  Check the Client BSSID by enabling the Wireless Bridging on the 

client’s “Wireless Bridging (WBR)” screen.

Client

 (

+

p.3-21)

[Wireless Bridging] Wireless Bridging: 

Enable

     

Operating Mode: 

Client

[Client Settings] 

SSID: 

WIRELESSLAN-0 (default)

     

Authentication: 

WPA2-PSK

     

Encryption: 

AES

     

PSK (Pre-Shared Key):  wirelessmaster

• The client’s “Interface” cannot be changed from “wbr17.”

6. Setting the Wireless Bridging function (Continued)

Wireless Bridging

connection

Cable LAN

Cable LAN

The settings above are just examples.

Master settings

Channel: 

036 CH (5180 MHz)

Virtual AP: 

ath4 

SSID: 

WIRELESSLAN-0

Authentication: 

WPA2-PSK

Encryption: 

AES

PSK: 

wirelessmaster

BSSID: 

00-90-C7-00-00-02 (Client BSSID)

192.168.0.1

192.168.0.2

Client settings

SSID: 

WIRELESSLAN-0

Authentication: 

WPA2-PSK

Encryption: 

AES

PSK: 

wirelessmaster

Master

Client

 

(

+

Continued on the next page)

Summary of Contents for AP-90M








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands