manualshive.com logo in svg

Icom AP-90M, Instruction Manual

Share
Download
Icom AP-90M Instruction Manual Download Page 10

1

BEFORE USING THE AP-90M

1-2

1. Panel description

 Top panel

q

w

e

r

q

 

POWER …………………  

Indicates the status. It also lights when the [MODE] button is pushed.

 Lights green: 

Power is ON.

 Lights red: 

“Accessing the USB flash drive” error.

 Blinks red: 

“Duplicated IP address” error.

 

 

(Detected only when booting)

 Lights orange:  Accessing the USB flash drive.

 

 

A firmware update is ready (Online update).

 Blinks orange:  Booting.

 

 

When [MODE] is operated.

 No light: 

Power is OFF.

w

 LAN  ……………………  

 Indicates the LAN status.

 Lights green: 

LAN is connected (1000BASE-T)

     Blinks green: 

LAN is communicating (1000BASE-T)

 Lights orange:  LAN is connected (10BASE-T/100BASE-TX)

     Blinks orange:  LAN is communicating (10BASE-T/100BASE-TX)

 No light: 

Not connected.

e

 WIRELESS 1  …………  

Indicates the WIRELESS 1 (internal antenna) status.

 Lights green: 

More than 1 connection/WPS succeeded*

1

.

     Blinks green: 

WPS is running.

     Blinks red: 

WPS failed.

     Lights orange:  Internal antenna enabled.
 

 

(Wireless station is not connected)

     Blinks orange:  Wireless operation is waiting for DFS.

 No light: 

Internal antenna disabled*

2

r

 WIRELESS 2  …………  

Indicates the WIRELESS 2 (external antenna) status.

 Lights green: 

More than 1 connection/WPS succeeded*

1

.

     Blinks green: 

WPS is running.

     Blinks red: 

WPS failed.

     Lights orange:  Internal antenna enabled.
 

 

(Wireless station is not connected)

     Blinks orange:  Wireless operation is waiting by for DFS.

 No light: 

External antenna disabled*

2

*

1

  When there is no wireless LAN station to connect with the AP-90M, or no wireless communication is 

made while “Wireless Unit” is enabled, the LED lights orange. The time when the LED turns orange dif-
fers, depending on the communication status.

*

2

  The LED also turns OFF when the same “Frequency Band” is set to both the internal antenna and the 

external antenna.

•  When the “LED OFF Mode” is set to “Enable,” the POWER indicator is dimmed, and when set to “Enable (Completely),” 

the all indicators are turned OFF. (Default: Disable)

Summary of Contents for AP-90M








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands