2
INSTALLATION GUIDE
2-11
Select “Interface” (example: ath0) to use the WPS function, and then click [Apply]. (Default: None)
2
Click [Wireless Settings], and then click [WPS].
1
7. Assigning the automatic SSID and PSK in the WPS function
q
Select
w
Select
e
Click
Wireless Settings > WPS
Enabling the WPS function
“Push Button” is used in this example. (
+
p.1-12)
• The [WPS] button on the AP-90M’s back panel is disabled when the WPS function is enabled.
This topic explains how to assign the automatic SSID and PSK (Pre-Shared Key) set to the Virtual AP for
the WPS (Wi-Fi Protected Setup) function on a wireless LAN station.
• See page 2-9 for the SSID and encryption setting details.
• The Authentications that can be used for the WPS function are “WPA-PSK” and “WPA2-PSK.”
Click [Reboot].
• Follow the instructions to reboot the AP-90M.
3
After the reboot is complete, click [Back].
4
Click
(
+
Continued on the next page)
5
Check “WPS Status.”
Check
The set Virtual AP settings
are displayed.
To reset the selected
interface, Select “None”
and click [Apply].
