3
CONNECTING TO A WIRELESS LAN (BASIC)
3-19
7. Setting the MAC Address Filtering
Click [Wireless Settings] and [Wireless 1], and then click [MAC Address Filtering].
1
Select [Enable] for “MAC Address Filtering” and then click [Apply].
2
Enter the MAC address of the wireless LAN station that you want to allow access, and then click
[Add].
3
q
Select
q
Enter
w
Click
w
Click
e
Check
Wireless Settings > Wireless 1/Wireless 2 > MAC Address Filtering
You can set the AP-90M to allow or deny the access from wireless LAN stations, for each virtual AP (ath0
to ath7).
• The following steps describe how to set to allow or deny access, using the Wireless 1’s (internal antenna) virtual AP
as an example.
q
Status
.......................Displays the wireless communication status.
[Connected]
: While communicating with the AP-90M, the [Connected]
button is displayed.
• If you click [Connected], the communication status and wireless
LAN stations are displayed.
[Disallowed]
: Displayed when the communication is denied by the AP-
90M.
[On the List]
: Displayed if the MAC address is registered but not con-
nected.
w
[Add]
/
[Delete]
........... Adds a MAC address of the displayed wireless LAN station to the list, or
deletes an address from the list.
K
q
K
w
