GAS DETECTIR SERIES USER MANUAL
36
8-17 Temperature Range
Depending on the model, there may be several temperature ranges available.
Some models may only have one temperature range.
Change the temperature range as follows:
1.
The default temperature range is -20 °C to 160 °C
(-4 °F to 140 °F).
Flip
the Temperature Range Switch to the down position to access the 60 °C to
180 °C (140 °F to 356 °F) temperature range. Flip the Temperature Range
Switch to the up position to return to the -20 °C to 160 °C
(-4 °F to 140 °F).
2.
To get to the 180 °C to 350 °C (356 °F to 662 °F) temperature range, first,
flip the Temperature Range Switch to the down position to access the
60
°C to 180 °C (140 °F to 356 °F) temperature range; then, press the C Key
to open the menu; then flip the F4 Dial to enable the 180 °C to 350 °C (356
°F to 662 °F) temperature range. Flip the F4 Dial to return to the 60 °C to
180 °C (140 °F to 356 °F) temperature range.
8-18 Temperature Units
By default the imager is set to measure temperatures in Celsius (°C)
.
The current
temperature unit displays on the LCD screen at the bottom in the form of a
temperature scale; example: -20 °C _ 160 °C.
Change the temperature unit as follows:
1.
Press the C Key until the
temperature unit value is selected.
2.
Press + or - on the directional pad to change the unit; the number values
will change automatically to reflect the new scale.
3.
Press and hold the C Key for 2 seconds to close the menu.
8-19
Date and Time Settings
Change the date and time settings as follows:
1.
Press the C Key until the
date and time is selected.
2.
Press either ◄ or ► on the directional pad to select a numerical value
placeholder.
3.
Press + or - on the directional pad to change the unit; the number values
will change automatically to reflect the new scale.
4.
Repeat steps 2-3 until date and time is correct.
5.
Press and hold the C Key for 2 seconds to close the menu.
AVOID IMAGING IN ENVIRONMENTS ABOVE 350 °C (662 °). DAMAGE TO THE
DEVICE MAY OCCUR.
