GAS DETECTIR SERIES USER MANUAL
35
8-15 Threshold Settings
By default the temperature alarms are disabled. Adjust the alarm threshold as
follows:
1.
Press the C Key until the alarm temperature icon is selected:
2.
Press the F1 Key to enable threshold settings. Press the F1 Key again to
disable threshold settings.
3.
Press either ◄ or ► on the directional pad to select a numerical value
placeholder.
4.
Press + on the directional pad to increase the number; Press - on the
directional pad to decrease the number.
5.
Repeat steps 2-3 until humidity value is correct.
6.
Press and hold the C Key for 2 seconds to close the menu.
8-15-1 Visual Alarm
If the detected temperature is higher than the alarm threshold a visual alarm
signal will show on the screen.
The default temperature alarm is 60 °C (140 °F). This means a visible alarm will
trigger at temperatures above 60 °C (140 °F)
.
Users can adjust the threshold
values to change when an alarm displays.
8-16 Palette
Users can change the polarity (color palette) to enhance temperature differences
on the thermal camera.
Press the F2 Key to change palettes.
