GAS DETECTIR SERIES USER MANUAL
27
8-3-2 Manual and Automatic Mode
Users can switch between automatic and manual modes to fine tune imaging
and gas detection.
Press and hold; then, release the A Key to switch between automatic and
manual mode.
DO NOT LOOK INTO THE FLASHLIGHT OR LASER. LOOKING INTO THE
FLASHLIGHT OR LASER MAY CAUSE EYE DAMAGE AND PERSONAL INJURY
.
DO NOT POINT THE FLASHLIGHT OR LASER DIRECTLY AT PEOPLE OR
ANIMALS OR INDIRECTLY OFF REFLECTIVE SURFACES.
SOME BUTTON FUNCTIONS CHANGE DEPENDING ON IF THE USER IS IN
AUTOMATIC OR MANUAL MODE. READ INSTRUCTIONS CAREFULLY.
LEAVING THE FLASHLIGHT AND LASER ON DRAINS THE BATTERY AT AN
INCREASED RATE. POWER OFF THE FLASHLIGHT AND LASER WHEN NOT IN
DIRECT USE.
8-4 Flashlight and Laser
8-4-1 Power On/Off the Flashlight
Use the flashlight to assist visibility in dark locations.
1.
Press the C
Key to until the flashlight icon is highlighted yellow.
2.
Press + on the directional pad to power on the flashlight. Press - On the
directional pad to power off the flashlight.
3.
Press and hold the C Key for 2 seconds to exit the menu.
8-4-2 Power On/Off the Laser
Use the laser to assist in location awareness.
1.
Press the yellow laser button to power on the laser. Press the yellow laser
button again to power off the laser.