GAS DETECTIR SERIES USER MANUAL
11
THE ENCAPSULATION RATING IS ONLY APPLICABLE WHEN ALL THE
OPENINGS ON THE CAMERA ARE SEALED WITH THEIR CORRECT COVERS,
HATCHES, OR CAPS. THIS INCLUDES THE COMPARTMENTS FOR DATA
STORAGE, BATTERIES, AND CONNECTORS.
•
Do not put holes in the battery with objects. Damage to the battery may occur.
•
Do not hit the battery with a hammer or apply strong impacts or electric
shocks to it. Damage to the battery may occur.
•
Do not put the battery in or near a fire, stove or other high-temperature
locations. Damage or ignition of the battery may occur.
•
Do not put the battery in direct sunlight or other high-temperature
locations. Damage or ignition of the battery may occur.
•
Do not solder directly onto the battery. Damage to the battery may occur.
•
Do not get water or salt water on the battery or device or permit the device
or battery to get wet. Damage to the battery may occur.
•
Remove any water or moisture on the battery before you install it. Damage
to the battery may occur.
•
If there is a leak from the battery and the fluid gets into the eyes, do not
rub the eyes. Flush well with water and immediately get medical care.
•
Always dispose of battery in accordance with local, state and federal
regulations.
•
Do not use the battery if, when used, charged, or placed in storage, there
is an unusual smell from the battery, the battery feels hot, changes color,
changes shape, or is in an unusual condition. Speak with a sales office if
one or more of these problems occurs.
•
Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/screen.
•
Be careful when cleaning the infrared lens. Do not clean the infrared lens
too vigorously. This can damage the anti-reflective coating.
•
Avoid condensation. Taking the imager from cold to hot will cause
condensation in thermal imager. To protect the imager, power on the
device and wait until it becomes warm enough for the condensation to
evaporate.
•
Keep device out of reach of children.
•
After the eyepiece is used for long time, its contrast will be lowered, and
the scene will be whitened. You can switch to the LCD display, and switch
back to the eyepiece some time later.
•
Storage: If you do not use the imager for a long period of time, put the
device in a cool and dry environment. Batteries should be stored in an
ambient temperature of -20 °C to 20 °C (-4 °F to 67.9 °F). Lithium batteries
will discharge time and should be fully charged before storage. It is
recommended to fully recharge the batteries every 3 months to prevent
damage. Store the device in an ambient temperature of -40 °C to 70 °C
(-40 °F to 158 °F).
