icetro ISI-271THN, User Manual, Page: 9 / 56

9
● The machine will be out of order if water gets frozen due to sub-zero temperature in winter.
Be sure to drain water before storing the machine.
● The manufacturer will not be responsible for the freezing and bursting of the machine without
draining water. Be sure to keep the following precautions to avoid charging of excessive
repair cost:
Warning
1. Press the "STOP" button on the front to stop the machine.
- Turn the machine off.
2. Seperate the water pipe from a hose to withdraw
all the water bottom the machine. (Picture 2)
Please put a basket under the water pipe and
the drainpipe for the water coming out from the machine.
※ Water will not be removed if not separate the water supply hose.
3. Please make the water faucet straight and
turn the valve to the right, so the water inside
can be removed. (Picture 1)
4. After all the water comes out, please lock the
water valve (Picture 1)
5. To use the machine again, please lock the drain valve
and connect a water supply hose to the water pipe (Picture 2) for water supply
and the machine can be used.
●
Be sure to check the following when connecting the water supply line!
1. The pipe must have a diameter bigger than Φ12.7mm
2. Check if the pressure is between 0.3 and 0.5 Mpa on the water pressure gauge after connecting the line.
(Figure 1)
(Figure 2)
Water pipe
(Seperate the water
pipe from a hose)
For long-term storage