icetro ISI-271THN, User Manual, Page: 16 / 56

16
[ R e g n r . ] C y l i n d e r
[ D e f r o s t ] C y l i n d e r
[ W a s h i n g ]
[ B o i l i n g ] C y l i n d e r
N o w : - 6 . 2 C / - 6 . 2 C
S e t : 8 . 0 C / 8 . 0 C
R e m a i n : 1 m i n / 1 m i n
N o w : - 6 . 2 C / - 6 . 2 C
S e t : 8 . 0 C / 8 . 0 C
R e m a i n : 1 m i n / 1 m i n
N o w : 0 . 5 A / 0 . 5 A
H o p p e r : 8 . 0 C / 7 . 0 C
D r u m : - 5 . 0 C / - 4 . 0 C
N o w : - 6 . 2 C / - 6 . 2 C
S e t : 60 . 0 C / 60 . 0 C
R e m a i n : 1 0 m i n / 1 0 m i n
②
③
⑤
⑥
⑦
④
①
For your
information
Use the ‘DEFROST’ function to melt the soft ice cream
in the cylinder.
“REGENERATION” mode.
“
DEFROST
” mode.
“
WASH
” mode.
“
BOILING
” mode.
If the soft ice cream is not used for a long time, then its shape
will be degraded. In this case, you can use the ‘Regeneration’
function to make it look better.
Press the ‘DEFROST’ + ‘AUTO’ button at the same time
for more than 2seconds, the status display window shown
in the right figure will appear.
※Caution: Activated under the operation conditions only.
① It displays the current temperature of the soft ice cream.
② It displays the temperature setting of the cylinder.
③ It displays the duration of time (by minute) to maintain the set temperature(②) after the current temperature(①)
reaches the set temperature.
As the duration of the temperature(③) maintenance expires after the current temperature(①) reaches
the target temperature(②), it will automatically enter into ‘AUTO’ mode to make soft ice cream.
The‘Regeneration’ function refers to a process where the soft ice cream is liquidized
and then Process of producing soft ice cream; operable in "AUTO" mode only.
It takes about 20 to 30 minutes.
It is used to operate the impeller of the hopper and the
dasher motor of the cylinder. Mainly, the Washing function
is used to remove the water or the liquid raw material.
④ It displays the present current value of the dasher motor
Heat the raw material or water in the cylinder and the
hopper to reach the set temperature in order to wash with
hot water. Press both ‘DEFROST’ + ‘WASH’ buttons
for longer than 1seconds to display the state window
shown in the picture on the right.
⑤ The set temperature of the cylinder is displayed.
⑥ The current soft ice cream temperature is displayed.
⑦ The retention time (minutes) is displayed, after the current
temperature(⑥) reaches the set temperature(⑤).
After the current temperature(⑥) reaches the set temperature(⑤), when the retention time(⑦)
passes, the operation halts.
【
Detail description of each mode
】