icetro ISI-271THN User Manual Download Page 28 | Manualshive

Page: 28 / 56

icetro ISI-271THN User Manual Download Page 28

28

CARBURETOR TUBE BODY

A small hole can improve the overrun, but it may depend on the amount of ingredients in
the cylinder. The fewer ingredient is in the cylinder, the higher the overrun becomes.
The more the ingredient is, the lower the overrun becomes.

The carburetor is made up of two parts.
The part that is inserted into the hole of the mixing tank is called
the body and a tube is inserted into this. The tube has a hole
at the top and at the bottom.
It can't be inserted in the reverse direction.

The figure shows the caburator with a blocked hole.
If you align the protrusion of the upper area of the caburator body with
the area having no hole in the upper area of the tube, then the hole in
the lower area of the caburator body will be blocked.
Condition of use ▶ Initial soft ice cream making
▶ "Pasteurize" mode on
▶ "Regeneration" mode on

This figure shows the caburator aligned with a large hole.
Align the protrusion of the upper area of the caburator body with the
large hole in the upper area of the tube. Decrease the overrun and
increase the amount of ingredients injection in this way when you
need continuous vending of the product.
Condition of use ▶ When the "Auto" mode is on

This figure shows the caburator aligned with a small hole.
Align the protrusion of the upper area of the caburator body with the
small hole in the upper area of the tube. Then, it will be aligned with
the small hole in the lower area of the caburator body. Increase
the overrun and decrease the amount of ingredients injection in this
way when you expect a small amount of sales.
Condition of use ▶ When the "Auto" mode is on

This figure shows the caburator aligned with a medium hole.
Align the protrusion of the upper area of the caburator body with the
medium hole in the upper area of the tube. Then, it will be aligned with
the medium hole in the lower area of the caburator body. It will make
the overrun and the amount of ingredients injection adequate for sales.
Condition of use ▶ When the "Auto" mode is on

Adjustment method for carburetor

CARBURETOR TUBE

For your

information

«
...
26
27
28
29
30
...
»

Summary of Contents for ISI-271THN

























































Reviews:

No comments