icetro ISI-271THN, User Manual, Page: 29 / 56

29
4. Remove the soft ice cream liquid in the
cylinder & the hopper and pour faucet
water into it.
Repeat it two or three times until you get
clean water from it.
3. Remove the drain box and put on
the drain bin.
2. Open the cover of the hopper(mix tank),
and then remove and clean the carburetor
(the body) and the impeller.
5. In order to remove residue of ingredients
in agitation shaft in the hopper, drain hole
or water level sensor, use neutral detergent
in the hopper, clean with brush and
apply steam cleaning process.
6. After steam-cleaning process, press the
'STOP' button to release the water and rinse
the machine with clean water.
1. Press 'STOP' button, and then 'DEFROST' on the
operation panel.
(Wait about ten minutes until soft ice cream is melted
in the cylinder.)
Cleaning method
Caution
When sterilization is performed once a day, the system shall be cleaned every 14 days as
shown in the figure
The carburetor, impeller, and ice cream discharge port shall be cleaned once a day.
PASTEURIZE
PASTEURIZE
DEFROST AUTO
WASH
STOP
STAND-BY
STAND-BY MIX-LOW
REGENERAT ION
BOILIN G
CARBURETOR TUBE
IMPELLER
①
②