icetro ISI-271THN, User Manual, Page: 24 / 56

24
1. Open mix tank cover and put in sufficient
amount of ingredients.
2. Insert the carburetor body and carburetor tube
into the mix tank.
3. Cover the carburetor hole and insert
the impeller.
4. Discharge 400g and pour it back into the
mix tank with the ingredients.
5. Operate the product by pressing
the AUTO button.
6. Open the carburetor hole after
completing operation.
How to make soft ice cream
PASTEURIZE
PASTEURIZE
DEFROST AUTO
WASH
STOP
STAND-BY
STAND-BY MIX-LOW
REGENERAT ION
BOILIN G
CARBURETOR TUBE
CARBURETOR BODY
CARBURETOR
IMPELLER
●
The smaller the carburetor hole is, the higher the overrun (air content) is.
Instead, in case of continuous sales, the ingredients supply gets slower and the soft
ice cream is let out slowly.
●
The carburetor hole can get clogged, so check it and wash it periodically during use.
●
The manufacturer shall not be responsible for any trouble (e.g. , spoilage of materials,
overcooling, non-production of ice cream) caused by using materials
in non-frozen state (10℃).
●
To continue sales on the“LOW OUT”condition, please make sure to remove the carburetor
for ice cream dispensing. If dispensing ice cream with the carburetor on, the ingredients
can be left in the mix tank.
For your
information