Installation
Installation of ceramic
Connect the Angle-valve at the Shut-off valve.
Insert the flange-packing into the flange.
flange-packing
flange
Turn the ceramic over. Place the flange at the bottom of ceramic and insert
the bolts assemble the flange and ceramic with packing nuts.
Lift up the ceramic and fix the flange at a drain.
Set the ceramic at level not to lean when
fixing the flange.
• Ceramic is heavy.
Recommend 2 workers when lifting up the ceramic.
flange
Drain
Bolts
Wax seal
Flange
or
11
13
5a.
Install seat anchors (included) in bowl deck holes.
5b.
Insert plastic hold-down bolt (included) under the rear of the seat. Align seat with
anchors/rear deck mounting hole.
5c.
Affix seat to bowl by using screws/washers threaded into the anchors in front and by
threading washer/plastic nut in the rear.
5d.
Insert rubber caps into front screw recesses.
5c
5a
5d
5b
Top-side
anchor screws
Rear
hold-down bolt
Rear
hold-down bolt
Top-side
seat anchors
Rubber
Anchor Caps
