Icera S-20 RF, Instruction Manual

Page: 8 / 25

7
Funcons & Operaon
Oscillang Wash
Press to move the NOZZLE FORWARD or to move the NOZZLE REARWARD during the wash cycle.
Press to acvate the OSCILLATING WASH. The nozzle moves back and forth while in REAR WASH posion.
This funcon can also be acvated in FRONT WASH posion by pressing FRONT WASH, then press
OSCILLATING WASH. The oscillang wash cycle will automacally stop a†er 3 minutes or by pressing
the buˆon.
Water pressure can be adjusted by pressing the buˆons during wash.
If you choose not to adjust the water pressure, it will default to the last used seŠng.
Nozzle Posion Adjustment
Water Pressure Adjustment
Press on the remote to adjust the temperature of the warm air.
If you choose not to adjust the dryer temperature, it will default to the last used seŠng.
Warm Air Dryer Temperature Adjustment
Seat temperature can be adjusted by pressing the buˆon on the remote.
Warm Seat Temperature Adjustment
There are 3 temperature seŠngs to choose from: - Low: 95° F (35° C)
- Medium: 100.4° F (38° C)
- High: 104° F (40° C)
Water temperature can be adjusted by pressing the buˆon on the remote.
There are 3 temperature seŠngs to choose from: - Low: 93.2° F (34° C)
- Medium: 98.6° F (37° C)
- High: 104° F (40° C)
Water Temperature Adjustment