Installation
Installation of ceramic
Connect the Angle-valve at the Shut-off valve.
Insert the flange-packing into the flange.
flange-packing
flange
Turn the ceramic over. Place the flange at the bottom of ceramic and insert
the bolts assemble the flange and ceramic with packing nuts.
Lift up the ceramic and fix the flange at a drain.
Set the ceramic at level not to lean when
fixing the flange.
• Ceramic is heavy.
Recommend 2 workers when lifting up the ceramic.
flange
Drain
Bolts
Wax seal
Flange
or
11
15
8.
GENTLY align bowl over drain flange guiding mounting bolts through the mounting
holes in the base of the bowl.
8
9a.
Thread bolt nuts onto bolts and hand-tighten.
9b.
Once hand-tightened, use a wrench to tighten further. DO NOT OVER-TIGHTEN. You
will risk cracking the ceramic. Tighten alternately as follows: Left nut = 1/2 a turn; Right
nut = 1/2 a turn; Left nut = 1/2 a turn; right nut = 1/2 a turn; then STOP.
9c.
Snap in cover tiles.
9b
9a
9c
