Installation
Installation of ceramic
Connect the Angle-valve at the Shut-off valve.
Insert the flange-packing into the flange.
flange-packing
flange
Turn the ceramic over. Place the flange at the bottom of ceramic and insert
the bolts assemble the flange and ceramic with packing nuts.
Lift up the ceramic and fix the flange at a drain.
Set the ceramic at level not to lean when
fixing the flange.
• Ceramic is heavy.
Recommend 2 workers when lifting up the ceramic.
flange
Drain
Bolts
Wax seal
Flange
or
11
12
4a.
Unbox the bidet seat and the rest of the bowl. Hand-tighten the bowl jet supply line
to the 1/2” plastic inlet on the left bottomside of the seat.
4b.
Hand-tighten the rim jet supply line to the 1/2” plastic inlet on the right bottomside
of the seat.
4c.
Hand-tighten the 3/4” water supply transfer hose (included) to the center 3/4” inlet,
leaving the opposite end hanging inside the rear cavity of the bowl.
4d.
Using an an adjustable wrench, GENTLY tighten each connection. DO NOT OVER-
TIGHTEN AS THE PLASTIC THREADS OF THE INLET WILL BE DAMAGED AND LEAK.
4a
4c
4b
4d
RIM JET
WATER
SUPPLY
FLUSH JET
