WARRANTY
International Construction Equipment, Inc. Standard Warranty
International Construction Equipment, Inc., hereafter referred to as ICE, warrants new products sold by it to be
free from defects in material and workmanship for a period of one year after date of delivery to the first user
and subject to the following conditions:
ICE’s obligation and liability under this warranty is expressly limited to replacing, at ICE’s option, any parts that
appear to ICE upon inspection to have been defective in material or workmanship. Such parts shall be provided
at no cost to the user at the business establishment of ICE or at the ICE distributor of the product during regular
working hours.
This warranty shall not apply to component parts or accessories not manufactured by ICE and which carry the
warranty of the manufacturer thereof or to normal maintenance parts (such as filters).
Replacements or repair parts installed in the product covered by this warranty are warranted only for the re-
mainder of the warranty as if such parts were original components of said product.
ICE’s obligation under this warranty shall not include any transportation charges, costs of installation, duty, tax-
es or any other charges whatsoever, or any liability for direct, indirect, incidental, or consequential damage or
delay.
If requested by ICE, products or parts for which a warranty claim is made are to be returned, transportation
paid, to ICE.
Any improper use, including operation after discovery of defective or worn parts, operation beyond rated capaci-
ty, substitution of parts not approved by ICE or any alteration or repair by others in such manner as in ICE’s
judgment affects the product materially and adversely shall void the warranty.
For impact pile hammers
, driving in excess of 10 blows per inch (25mm) [set of 0.1 (2.5mm) per blow] is
considered practical refusal. Driving in excess of 10 blows per inch (25mm) for more than 6 inches (150mm) or
driving in excess of 20 blows per inch (25mm) at all is considered improper use and will void the hammer war-
ranty.
For vibratory drivers
, driving/extracting when the movement is less than 1” (25mm) per minute is considered
practical refusal. Driving/extracting when movement is less than 1” (25mm) per minute for more than 5 minutes
of driving/extracting or driving at all when penetration is less than 1” (25mm) per minute and amplitude is
greater than 1” (25mm) [vibrator and pile are bouncing] is considered improper use and will void the vibrator
warranty. Driving/extracting when bearing covers (paint removed) are above 210°F (100°C) is considered im-
proper use and will void the vibrator warranty. Use of a vibrator on a batter without discussing the operation
with ICE and getting prior written approval is considered improper use and will void the vibrator warranty.
For limited-access drills and top-drive rotary heads
, the use of a down-the-hole hammer without discuss-
ing the operation with ICE and getting prior written approval is considered improper use and will void the drill
warranty.
For leads
, use in lengths or at batters exceeding the initial set-up without ICE evaluating the new set-up and
providing prior written approval is considered improper use and will void the leads warranty.
For power units
, welding on power units or other equipment with electrical or electronic controls must be
done with the battery leads disconnected. Welding with battery leads connected will void the warranty.
ICE MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND MAKES NO WARRANTY OF MERCHANTABIL-
ITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
No employee or representative is authorized to change this warranty unless such change is made
in writing and signed by an officer of ICE.
W10Nov09
