Section 5: OPERATION Page 27
OM-ZR-May15
Local or Remote Operation
The power unit and vibrator or rotary head may be operated either from the control panel (LOCAL) or from the
remote-control pendant (REMOTE). Additionally, an optional radio control is available for remote operation.
Remote or Local operation is selected by using the REMOTE-LOCAL switch at the control panel.
Operation using Remote-control Pendant (REMOTE)
The remote-control pendant can control the operation of the vibrator or rotary head. The pendant is connected
to the control cabinet with 50’ (15 m) of electrical cable to permit operation from any position to best view the
operation of the equipment. Optional pendant extensions are available upon request.
The REMOTE-LOCAL switch must be in the REMOTE position to operate the vibrator using the remote-control
pendant. To use the controls on the control panel, the switch must be in the LOCAL position.
Operation From the Control Panel (LOCAL) if Pendant is Damaged or Missing
If the remote-control pendant is damaged, if the pendant line is cut, or if the radio-remote is malfunctioning, the
equipment may be operated from the control panel.
If the remote-control pendant is damaged, disconnect the remote-control pendant from the control panel.
Open the control panel and depress the button for Pendant Override. A LED light on the switch will illuminate
once the switch has been activated. When main power is turned off, the Pendant Override will be deactivated
and will have to be depressed again. Make sure that the REMOTE-LOCAL switch is in the LOCAL position.
To operate using pendant, install an undamaged pendant and change the REMOTE-LOCAL switch
to REMOTE.
Pendant Override Switch
REMOTE/LOCAL
Toggle Selector Switch
Operation From the Control Panel (LOCAL) if Pendant is Damaged or Missing
To operate using a radio-remote control, unplug the remote control pendant and plug in the radio
remote control module.
