IBT Technologies CI7BM, User Manual

Page: 63 / 113

Chapter 3 BIOS Configuration
CI7BM User’s Manual 59
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled to activate each channel
separately.
Onboard PCI SCSI Chip
The default setting of Enabled enables the onboard PCI SCSI function of
the system
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
Init AGP Display First
This field allows the system to initialize first the VGA card in the AGP
slot when system is turned on.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system and you wish to use it. If you install an add-in
FDC or the system has no floppy drive, select Disabled in this field. This
option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Parallel Port 378H/IRQ7
UART Mode Select
This field determines the UART mode in your computer. The settings are
Normal, IrDA and ASKIR . The default value is Normal .
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP Normal Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port