IBT Technologies CI7BM, User Manual

Page: 62 / 113

Chapter 3 BIOS Configuration
58 CI7BM User’s Manual
Integrated Peripherals
This option sets your hard disk configuration, mode and port.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALSP
AWARD SOFTWARE INC.
IDE HDD Block Mode : Enabled
IDE Primary Master PIO : Auto Onboard Parallel Port : 378/IRQ7
IDE Primary Slave PIO : Auto Parallel Port Mode : SPP
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
Onboard PCI SCSI Chip : Enabled
USB Keyboard Support : Disabled
Init AGP Display First : AGP
Onboard FDC Controller : Enabled ESC : Quit
Ç È Å
: Select Item
Onboard Serial Port 1 : 3F8/IRQ4 F1 : Help PU/PD/+/- : Modify
Onboard Serial Port 2 : 2F8/IRQ3 F5 : Old Values (Shift) F2 : Color
UART Mode Select : Normal F6 : Load BIOS Defaults
F7 : Load Setup Defaults
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto and
Disabled .