Operation
3-12
ImageTracDS 1210/1155 User’s Manual
CAUTION:
When setting document, be careful not to cut your finger with the edge of the
sheet.
NOTICE:
When sliding the Sheet Gude, hold the center of it or it may be damaged.
Setting for Mixed Size Paper in the Input Tray
1. Adjust the Extension Tray according to documents.
2. Slide the Sheet Guide wider than the stack of papers.
3. Stack the smaller papers on top.
4. Align the papers to the top and left edges.
5. Place the paper stack as face up on the Input Tray and align it to the top edge and left edge.
6. The Sheet Guide aligned with largest papers.
Check the following or paper jam or skew occurs.
The edges of the papers are not folded.
Especially check the paper conditions at the bottom.
Paper stack is not aligned to the left edge.
Paper stack is not straight.
The Sheet Guide is not touched to paper stack.
Height of paper stack is 55mm or more.
Not straight
Not touched
Sheet Guide
Smaller sheets
Bigger sheets
Input Tray
Sheet Guide
Input Tray
Extension Tray
Summary of Contents for ImageTracDS 1210
