Ibml ImageTracDS 1210, User Manual

Page: 91 / 123

Maintenance 4-16
ImageTracDS 1210/1155 User’s Manual
5. Remove the Reverse Roller from the Pulley (Reverse) (a Reverse Roller is just inserted
without glue so you can remove it with your fingers and replace it).
6. Install a Reverse Roller using the above steps in reverse. Reverse Roller has no mounting
direction.
7. After you install a Reverse Roller, in order for the Pulley (Reverse) and the Reverse Roller to
fit together completely, rotate the Reverse Roller with your palm a couple of times while
pushing it firmly.
8. Fully insert the Reverse Roller assembly into the grooves at both sides and close the
Reverse Cover assembly.
Fully inserted: Good
Not inserted: Not good
Pulley (Reverse)
Reverse Rollers
Pulley (Reverse)