IBM xSeries 380, Hardware Maintenance Manual

Page: 80 / 324

70
Hardware Maintenance Manual: xSeries 380
Test parameter script file
This file describes the test parameters, both batch mode parameters and individual
test parameters. This file can be created by AMIDiag. It can be edited by any text
editor. This sections and entries in this file are:
Section Entries
[Cycles] Count Specifies the number of test cycles.
Cycle Mode All or One.
CycleNumber Specifies the cycle number.
Mode Passboard, Time bound, or
Continuous.
Passes Specifies number of passes.
Hours Specifies the hour part of time period.
Minutes Specifies the minute part of time
period.
BreakAllOnError Breaks from batch mode on first error.
[CYCLEn:BatchParams] Specifies batch mode parameters for cycle n.
ModeInCycle Passbound, Timebound, or
Continuous
PassesInCycle Specifies the number of passes in a
cycle.
HoursInCycle Specifies the hour part of time period
in a cycle.
MinutesInCycle Specifies the minute part of the time
period in a cycle.
Order Default, Random, or Testwise
WaitOnError YES or NO
BreakOnError YES or NO
TestInteractiveAll YES or NO. This is the global control
for interactive tests. If this is set to Yes,
TestInteractive is force to Yes for all
interactive tests regardless of what
their individual TestInteractive
parameter value is.
QuickTestAll YES or NO. The default is No. This is
the global control for the Q uick Test. If
this is set to Yes, Quick Test is forced
for all tests
that support Quick Test regardless of
what their individual Quick Test
parameter value is.
[CYCLEn:ErrorLog] Error Log parameters
LogErrors YES or NO
LogActivity YES or NO
StartTimeStamp YES or NO