IBM xSeries 380, Hardware Maintenance Manual

Page: 50 / 324

40
Hardware Maintenance Manual: xSeries 380
If the starting and ending block are not specified, this test reads from block 0 to the
last block. This test fails if an audio CD is placed in the drive. This test supports multi-
format CDs with data and audio tracks. The random test is performed on the specified
blocks between the start and end blocks.
SCSI CD-ROM drive play test
Before running this test: connect a speaker to the CD-ROM drive and insert an audio
CD in the CD-ROM drive.
This test makes sure that the CD-ROM drive can play audio CDs. This test issues the
SCSI Play command to the CD-ROM drive. You can select the sequence of tracks
played. Follow the screen directions to play an audio CD. A default parameter screen
appears when you select SCSI CD-ROM Play Test:
The following appears if you specify an individual drive:
SCSI CD-ROM drive data test
This test makes sure that the SCSI CD-ROM drive reads data correctly. Select SCSI
CDROM Data test. Set the Test CDROM n parameter to Yes and choose Continue to
run this test.
SCSI tape tests
The SCSI Tape tests include:
• SCSI Tape Buffer Test
• SCSI Tape Self Test
Parameter Description
overall % Specifies drivewise :/ as set for each drive.
Common: Use the term % to specify all drives
SCSI CD-ROM n Specify an individual drive parameter.
Sequential Test
Sequential Test
% to test
CONTINUE
: YES
: 100
Overall % Parameters
SCSI Disk 0
CONTINUE
100
Select SCSI Disk
SCSI CD-ROM Play Test
Test CDROM0
Start Block
End Block
CONTINUE
: YES
: 000000000
: 020280000