IBM xSeries 380, Hardware Maintenance Manual

Page: 208 / 324

198
Hardware Maintenance Manual: xSer ies 380
12. Loosen the two captive screws (
򍦠 2 򐂰
) that hold the plastic shield (
򍦠 1 򐂰
) over the I/O
Baseboard. These screws also secure the baseboard tray to the server chassis.
13. Remove the plastic shield.
14. Disconnect the PCI LED cable (
򍦠 3 򐂰
) and T-docking board interface cable (
򍦠 4 򐂰
)
from the I/O Baseboard.
15. Use the two extraction/installation levers on the sides of the I/O Baseboard to
pull it clear of the connector on the Sideplane (
򍦠
1
򐂰
).
16. Once loose, slide the I/O Baseboard in the direction of the levers against the
chassis frame.
17. Lift the connector end out of the chassis first (
򍦠 1 򐂰
), then lift the rest of the I/O
Baseboard out of the chassis.
18. Place on a clean ESD-protected work surface. Remove the nine screws ( 򍦠 2 򐂰 ) and
the two hex jackscrews that secure the video connector (
򍦠 3 򐂰
) from the I/O
Baseboard to separate it from the I/O Baseboard tray.
A