IBM xSeries 230 6RY, Hardware Maintenance Manual

Page: 116 / 194

installation.
To start any Netfinity Manager service that appears in the Service Manager
window, double-click the icon for that service. To start a Netfinity Manager service
on a remote system, use the Remote System Manager service.
Netfinity Manager service descriptions
Each Netfinity Manager service consists of a base program and a graphical user
interface (GUI). The service base programs enable Netfinity Manager to remotely
access the individual services, but do not allow for local access. The service GUIs,
when functioning along with their respective base program, enable access to the
service.
Some services are available only on systems with certain system configurations.
These services are:
v
Alert on LAN Configuration (available only on systems running Windows 95 or
later or Windows NT 4.0 or later)
v
Capacity Management (available only on systems running Windows NT 4.0 or
later)
v
Cluster Manager (available only on systems running Windows NT 4.0 or later)
v
DMI Browser (requires DMI Service Layer)
v
ECC Memory Setup (requires ECC memory)
v
Predictive Failure Analysis (requires a PFA-enabled hard disk drive)
v RAID Manager (requires a RAID hard disk drive subsystem)
v
System Partition Access (requires a built-in System Partition)
v
Update Connector Manager (available only on systems running Windows NT 4.0
or later)
Brief descriptions of each of the Netfinity Manager services follow. Complete
instructions on how to use each of these services can be found in the
service-specific chapters of the Netfinity Manager User’s Guide .
Advanced System Management
The Advanced System Management service provides extensive functionality
available for your IBM PC Server Advanced System Management Adapter,
108
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y