IBM xSeries 200, Hardware Maintenance Manual

Page: 88 / 148

To remove the system board, do the following:
1.
Power-off the server, if it is on.
2. Unplug the server.
3. Remove the cover (see “Side cover removal” on page 42).
4. Remove the front bezel (see “Bezel removal” on page 43).
5. Remove the support bracket (see “Removing the support bracket assembly”
on page 45).
6. Disconnect the cables.
7. Remove the adapter cards and both adapter retaining brackets (see “Adapter
installation” on page 47).
8.
Remove the hard disk drive cage (see “Hard disk drive cage” on page 77).
9. Remove memory modules (see “Memory modules” on page 54).
10.
Remove microprocessors and/or terminator cards (see “Microprocessor” on
page 56).
11. Remove screws and lift the system board out of the server.
CD-ROM drive
Before you begin:
v Read “Safety information” on page 103.
v
Review the information in “Before you begin” on page 40.
80
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual