IBM xSeries 200, Hardware Maintenance Manual

Page: 100 / 148

Error Code/Symptom FRU/Action
206-XXX-000
(Failed Diskette Drive test)
1. Cable
2. Diskette Drive
3.
System Board
215-XXX-000
(Failed IDE CD-ROM test)
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
217-198-XXX
(Could not establish drive
parameters)
1. Check cable and termination
2. SCSI backplane
3. Fixed disk
217-XXX-000
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
1. Fixed Disk 1
217-XXX-001
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
1.
Fixed Disk 2
217-XXX-002
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
1. Fixed Disk 3
301-XXX-000
(Failed Keyboard test)
1. Keyboard
302-XXX-000
(Mouse failed)
1.
Mouse
305-XXX-000
(Video monitor failure)
1. Video Monitor
2. Video Adapter
405-XXX-000
(Failed Ethernet test on
controller on the System
Board)
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
405-XXX-00N
(Failed Ethernet test on
adapter in PCI slot N)
1. Adapter in PCI slot N.
2.
System Board
415-XXX-000
(Failed Modem test)
1.
Cable
2.
Modem
3. System Board
Error symptoms
General FRU/Action
CD is not working properly.
1. Clean the CD.
2.
Run CD-ROM diagnostics.
3.
CD-ROM Drive
92
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual