IBM xSeries 200, Hardware Maintenance Manual

Page: 49 / 148

v
Cables for optional adapters are routed according to the instructions that are
provided with the adapters.
v
A failed fan is replaced within 1 hour.
Stabilizing feet
The four feet on the bottom of the server provide additional stability when the feet
are placed in the stabilizing position.
Complete the following steps to place the feet in the stabilizing position.
1. Place the server on its side.
2.
Locate the release tab inside the foot; then, lift up on the tab.
Note: The following illustration shows the rear feet located on the bottom rear
of the server.
Release tab
Release tab
Feet (unlocked position)
3. Rotate the foot inward to the unlocked position; then, remove the foot from the
server.
4. Align the post in the center of the foot with the hole on the bottom of the
server and place the foot between the guides as indicated.
Note: The following illustration shows the rear feet located on the bottom rear
of the server.
Installing options
41