IBM xSeries 200, Hardware Maintenance Manual

Page: 115 / 148

Safety notices (multi-lingual translations)
The caution and danger safety notices in this section are provided in the following
languages:
v
English
v
Brazilian/Portuguese
v
Chinese
v French
v
German
v Italian
v
Korean
v
Spanish
Important: All caution and danger statements in this IBM documentation begin
with a number. This number is used to cross reference an English
caution or danger statement with translated versions of the caution or
danger statement in this section.
For example, if a caution statement begins with a number 1,
translations for that caution statement appear in this section under
statement 1.
Be sure to read all caution and danger statements before performing
any of the instructions.
v
Statement 1
DANGER
Electrical current from power, telephone and communication cables is hazardous.
To avoid a shock hazard:
v
Do not connect or disconnect any cables or perform installation, maintenance,
or reconfiguration of this product during an electrical storm.
v Connect all power cords to a properly wired and grounded electrical outlet.
v
Connect to properly wired outlets any equipment that will be attached to this
product.
v
When possible, use one hand only to connect or disconnect signal cables.
v
Never turn on any equipment when there is evidence of fire, water, or
structural damage.
v
Disconnect the attached power cords, telecommunications systems, networks,
and modems before you open the device covers, unless instructed otherwise
in the installation and configuration procedure s.
v Connect and disconnect cables as described in the following table when
installing, moving, or opening covers on this product or attached devices.
Related service information
107