IBM x3100 M5 Type 5457, Installation And Service Manual

Page: 111 / 688

– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz,
regardless of the system state
– Remotely accessing the server, using the keyboard and mouse from a remote
client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a
remote client, and mapping ISO and diskette image files as virtual drives that
are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server
as a virtual drive
The blue-screen capture feature captures the video display contents before the
IMM restarts the server when the IMM detects an operating-system hang
condition. A system administrator can use the blue-screen capture feature to
assist in determining the cause of the hang condition. For more information, see
“Using the remote presence and blue-screen capture features” on page 106.
v
Ethernet controller configuration
For information about configuring the Ethernet controller, see “Configuring the
Gigabit Ethernet controller” on page 110.
v
Features on Demand software Ethernet software
The server provides Features on Demand software Ethernet support. You can
purchase a Features on Demand software upgrade key for Fibre Channel over
Ethernet (FCoE) and iSCSI storage protocols. For more information, see
“Enabling Features on Demand Ethernet software” on page 110.
v
Features on Demand software RAID software
The server provides Features on Demand software RAID support. You can
purchase a Features on Demand software upgrade key for RAID. For more
information, see “Enabling Features on Demand RAID software” on page 111.
v
IBM Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI
settings and IMM settings. Use the ASU program online or out of band to
modify UEFI settings from the command line without the need to restart the
server to run the Setup utility. For more information about using this program,
see “IBM Advanced Settings Utility program” on page 111.
v Configuring RAID arrays
For information about configuring RAID arrays, see “Configuring RAID arrays”
on page 111.
The following table lists the different server configurations and the applications
that are available for configuring and managing RAID arrays.
Table 9. Server configuration and applications for configuring and managing RAID arrays
Server configuration
RAID array configuration
(before operating system is
installed) RAID array management
(after operating system is
installed)
ServeRAID-M1115 adapter MegaRAID BIOS
Configuration Utility (press
Ctrl+H to start), pre-boot CLI
(press Ctrl+P to start),
ServerGuide, HII MegaRAID Storage Manager
(MSM), MegaCLI (Command
Line Interface), and IBM
Director
ServeRAID-M5110 adapter MegaRAID BIOS
Configuration Utility (press
Ctrl+H to start), pre-boot CLI
(press Ctrl+P to start),
ServerGuide, HII MegaRAID Storage Manager
(MSM), MegaCLI, and IBM
Director
Chapter 3. Configuration information and instructions
95