IBM WebSphere DataPower 7198, Installation And User Manual

Page: 40 / 88

> 18 kg (39.7 lb)
To install the appliance on the slide rails, complete the following steps as shown in
Figure 13.
1. Pull the slide rail forward
1
.
2.
Use two people to carefully lift the appliance
2
and tilt it into position over
the slide rails so that the rear nail heads
3
on the appliance line up with the
rear slots
4
on the slide rails.
3. Slide the appliance down until the rear nail heads slip into the two rear slots,
and then slowly lower the front of the appliance
5
until the other nail heads
slip into the other slots on the slide rails.
4. Make sure that the front latch
6
slides over the nail heads.
5.
If the appliance is locked into place, slide the appliance toward you so that you
can attach the brackets with the captive screws.
6. Slide the appliance into the rack, as shown in Figure 14 on page 21.
Lift point
Lift point
Figure 13. Secure the appliance in the rack
20
Installation and User's Guide