IBM WebSphere DataPower 7198, Installation And User Manual

Page: 24 / 88

The labels in Figure 1 on page 3 and Figure 2 correspond to the following
components on the front of the appliances:
A
Console connector
B USB port
C LCD module
D Hard disk drive module 2
E Hard disk drive module 0
F Hard disk drive module 3
G Hard disk drive module 1
H Fault LED
I Locate LED
J Power LED
K Power button
L
MGT0
Ethernet connector
M
MGT1
Ethernet connector
N Left Ethernet modules
O Right Ethernet modules
Console connector
The front panel has a console connector. The console connector is an 8-position
modular jack (ISO 8877, often called RJ45). For initial configuration, use the
supplied cable to connect from an ASCII terminal
1
to the appliance or to connect
from a PC that is running terminal emulation software to the appliance.
USB port
The front panel has a USB interface that conforms to USB 2.0 devices. This USB
connector is not enabled and therefore does not provide any connection.
1. A simple device that transmits (inputs) and receives (outputs) ASCII data.
O
N
L
M H
J
I
A C D E F G B
K
Figure 2. Type 7199 front view
4
Installation and User's Guide