manualshive.com logo in svg

IBM Ultrastar 36LZX, Specifications

The IBM Ultrastar 36LZX is a high-performance hard drive with a storage capacity of 36GB. For quick and easy installation, download the free Quick Installation Manual from manualshive.com. This comprehensive manual will guide you through the setup process, ensuring smooth operation of your Ultrastar 36LZX.

Share
Download
background image

235

12.2.5  Information Bytes (Byte 3 through 6)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

234

12.2.4  Sense Key (Bit 3 - 0 of byte 2)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

234

12.2.3  ILI: Incorrect Length Indicator (Bit 5 of byte 2)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

234

12.2.2  Error Code (Bit 6 - 0 of byte 0)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

234

12.2.1  Valid (Bit 7 of byte 0)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

234

12.2  Sense Data Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

233

12.1  SCSI Sense Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

233

12.0  SCSI Sense Data

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

231

11.18  Idle Time Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

230

11.17.3  Diagnostics Fault Reporting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

230

11.17.2  Diagnostics Command

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

230

11.17.1  Power on Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

230

11.17  Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

229

11.16.2  Reset Actions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

229

11.16.1  Reset Sources

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

229

11.16  Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.15  Contingent Allegiance Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.14.3  Initiator Data Transfer Mode Parameter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.14.2  Initiator Mode Select/Mode Sense Parameters

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.14.1  Initiator Sense Data

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.14  Multiple Initiator Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

228

11.13  Selection without ATN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.12  Non-arbitrating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.11  Single Initiator Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.10  Reselection Timeout

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.9.2  Read Ahead

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.9.1  Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

227

11.9  Segmented Caching

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

225

11.8  Automatic Rewrite/Reallocate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

225

11.7  Write Cache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

224

11.6  Back to Back Write

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

224

11.5  Concurrent I/O Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

224

11.4  Command reordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.6  Device behavior on Command queuing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.5  Queue Full status

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.4  Command queuing rule

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.3  Untagged queuing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.2  Tagged queuing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

11.3.1  Queue depth

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

222

11.3  Command queuing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

222

11.2  Priority commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

221

11.1.10  Command processing while reserved

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

215

11.1.9  Degraded Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

215

11.1.8  Deferred Error

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

214

11.1.7  Internal Error Condition

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

214

11.1.6  Command Processing During Startup and Format Operations

. . . . . . . . . . . . . . . . . . . . . .

213

11.1.5  Unit Attention Condition

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

211

11.1.4  Command Processing during execution of active I/O process

. . . . . . . . . . . . . . . . . . . . . . .

210

11.1.3  Incorrect Initiator Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

210

11.1.2  Invalid LUN in Identify Message

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

209

11.1.1  Priority of SCSI Status Byte Reporting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

209

11.1  SCSI Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

209

11.0  Additional information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

208

10.4.7  MESSAGE REJECT Message

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

208

10.4.6  INITIATOR DETECTED ERROR Message

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ultrastar 36LZX hard disk drive specifications

7

Summary of Contents for Ultrastar 36LZX


























































































































































































































































Reviews:

No comments

Related manuals for Ultrastar 36LZX

G-Technology G-DRIVE mobile USB Manual preview
G-DRIVE mobile USB
Brand: G-Technology Pages: 18
G-Technology G DRIVE User Manual preview
G DRIVE
Brand: G-Technology Pages: 34
IBM Tape Library Magstar 3494 Operator'S Manual preview
Tape Library Magstar 3494
Brand: IBM Pages: 378
IAC INDUSTRIES Quick Ship ISLES WORKMASTER Assembly Instructions Manual preview
Quick Ship ISLES WORKMASTER
Brand: IAC INDUSTRIES Pages: 11
Macpower & Tytech M9 - NDAS User Manual preview
M9 - NDAS
Brand: Macpower & Tytech Pages: 21
Accordance Systems araid 3500 User Manual preview
araid 3500
Brand: Accordance Systems Pages: 58
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Brand: NETGEAR Pages: 4
Seagate Exos ST2000NM0075 Product Manual preview
Exos ST2000NM0075
Brand: Seagate Pages: 42
ABSCO SHEDS 30082SECOK Manual preview
30082SECOK
Brand: ABSCO SHEDS Pages: 23
Western Digital WD3000F9YZ Applications preview
WD3000F9YZ
Brand: Western Digital Pages: 2
Actidata Ti-NAS QT-6 Quick Start Manual preview
Ti-NAS QT-6
Brand: Actidata Pages: 8
Palram 100144403 Manual preview
100144403
Brand: Palram Pages: 48
Gardener's 8593617 Quick Start Manual preview
8593617
Brand: Gardener's Pages: 2
Toshiba 480082-D0 Quick Install Manual preview
480082-D0
Brand: Toshiba Pages: 9
Toshiba (HDD2188) User Manual preview
(HDD2188)
Brand: Toshiba Pages: 11
Toshiba 593209-A0 User Manual preview
593209-A0
Brand: Toshiba Pages: 17
Toshiba 593209-D0 Limited Warranty preview
593209-D0
Brand: Toshiba Pages: 20
Toshiba 2.5-Zoll SATA 6Gbit/s SSD Manual preview
2.5-Zoll SATA 6Gbit/s SSD
Brand: Toshiba Pages: 28

Brands by name

Popular brands

Load more brands