manualshive.com logo in svg

IBM Ultrastar 36LZX, Specifications

The IBM Ultrastar 36LZX is a high-performance hard drive with a storage capacity of 36GB. For quick and easy installation, download the free Quick Installation Manual from manualshive.com. This comprehensive manual will guide you through the setup process, ensuring smooth operation of your Ultrastar 36LZX.

Share
Download
background image

207

10.4.5  DATA OUT Phase Parity Error

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

207

10.4.4  COMMAND Phase Parity Error

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

207

10.4.3  MESSAGE IN Phase Parity Error (Message Parity Error)

. . . . . . . . . . . . . . . . . . . . . . . . . .

207

10.4.2  MESSAGE OUT Phase Parity Error

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

207

10.4.1  Unexpected BUS FREE Phase Error Condition

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

207

10.4  SCSI Bus Related Error Handling Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

206

10.3  Attention Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

205

10.2  Supported Message Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

204

10.1.20  IDENTIFY (80 - FF)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

204

10.1.19  IGNORE WIDE RESIDUE (23h)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

203

10.1.18  QUEUE TAG MESSAGES (20h, 21h, 22h)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

10.1.17  CLEAR QUEUE TAG (0E)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

10.1.16  ABORT TAG (0D)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

10.1.15  BUS DEVICE RESET (0C)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

10.1.14  LINKED COMMAND COMPLETE WITH FLAG (0B)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

10.1.13  LINKED COMMAND COMPLETE (0A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

201

10.1.12  MESSAGE PARITY ERROR (09)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

201

10.1.11  NO OPERATION (08)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

201

10.1.10  MESSAGE REJECT (07)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

201

10.1.9  ABORT (06)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

10.1.8  INITIATOR DETECTED ERROR (05)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

10.1.7  DISCONNECT (04)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

10.1.6  RESTORE POINTERS (03)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

10.1.5  SAVE DATA POINTER (02)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199

10.1.4  PARALLEL PROTOCOL REQUEST (01,06,04H)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

197

10.1.3  WIDE DATA TRANSFER REQUEST (01,02,03H)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

192

10.1.2  SYNCHRONOUS DATA TRANSFER REQUEST (01,03,01H)

. . . . . . . . . . . . . . . . . . . . . .

192

10.1.1  COMMAND COMPLETE (00)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

191

10.1  Supported Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

191

10.0  SCSI Message System

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

189

9.0  SCSI Status Byte

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

187

8.45  WRITE SAME (41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

186

8.44  WRITE LONG (3F)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

185

8.43  WRITE EXTENDED (2A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

184

8.42.5  Write Data to Echo Buffer (Mode 1010b)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

183

8.42.4  Download Microcode and Save (Mode 0101b)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

183

8.42.3  Download Microcode (Mode 0100b)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

182

8.42.2  Write Data (Mode 0010b)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

182

8.42.1  Combined Header And Data (Mode 0000b)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

181

8.42  WRITE BUFFER (3B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

180

8.41  WRITE AND VERIFY (2E)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

179

8.40  WRITE (0A)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

178

8.39  VERIFY (2F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

177

8.38  TEST UNIT READY (00) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

176

8.37  SYNCHRONIZE CACHE (35) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

175

8.36  START/STOP Unit (1B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

173

8.35  SET DEVICE IDENTIFIER (A4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

172

8.34.3  Send Diagnostic Page 80

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

171

8.34.2  Send Diagnostic Page 40

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

171

8.34.1  Send Diagnostic Page 0

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

8.34  SEND DIAGNOSTIC (1D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

168

8.33  SEEK EXTENDED (2B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

167

8.32  SEEK (0B)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

166

8.31  REZERO UNIT (01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

165

8.30  RESERVE (56) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ultrastar 36LZX hard disk drive specifications

6

Summary of Contents for Ultrastar 36LZX


























































































































































































































































Reviews:

No comments

Related manuals for Ultrastar 36LZX

SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
Et ETD-SB-HL3205 Manual preview
ETD-SB-HL3205
Brand: Et Pages: 22
Seagate Exos ST2000NM0075 Product Manual preview
Exos ST2000NM0075
Brand: Seagate Pages: 42
Schaffner HOLZLAGER 7021 Assembly Instructions preview
HOLZLAGER 7021
Brand: Schaffner Pages: 4
JetStor JX JBOD Series Quick Installation Manual preview
JX JBOD Series
Brand: JetStor Pages: 4
Seagate Medalist 1010 Installation Manual preview
Medalist 1010
Brand: Seagate Pages: 42
HOLZMANN MASCHINEN WB160L Assembly Instruction Manual preview
WB160L
Brand: HOLZMANN MASCHINEN Pages: 18
Dancover CG-K2010 Owner'S Manual preview
CG-K2010
Brand: Dancover Pages: 30
DeWalt D271055 Instructions Manual preview
D271055
Brand: DeWalt Pages: 76
Hitachi HTS722010K9A300 Quick Installation Manual preview
HTS722010K9A300
Brand: Hitachi Pages: 4
Sun Microsystems StorageTek System Planning Manual preview
StorageTek
Brand: Sun Microsystems Pages: 118
Toshiba HDD2191 User Manual preview
HDD2191
Brand: Toshiba Pages: 11
Toshiba HDD2190 User Manual preview
HDD2190
Brand: Toshiba Pages: 11
Toshiba HDD2187 User Manual preview
HDD2187
Brand: Toshiba Pages: 11
Toshiba HDD2184 User Manual preview
HDD2184
Brand: Toshiba Pages: 11
Toshiba HDD2189 User Manual preview
HDD2189
Brand: Toshiba Pages: 12
Toshiba HDD2182 User Manual preview
HDD2182
Brand: Toshiba Pages: 11
Toshiba HDD2181 User Manual preview
HDD2181
Brand: Toshiba Pages: 11

Brands by name

Popular brands

Load more brands