IBM Ultrastar 36LZX, Specifications

Page: 120 / 249

8.8.12 Mode Page 1A (Power Control)
(MSB)
Standby Condition Timer
(LSB)
8
|
11
(MSB)
Idle Condition Timer = 0
(LSB)
4
|
7
Standby Idle Reserved = 0 3
Reserved = 00h 2
Page Length = 0Ah 1
Page Code = 1Ah RSVD = 0 RSVD = 0 0
0 1 2 3 4 5 6 7
Bit
Byte
Figure 92. Page 1A (Power Control)
Ÿ
The value for the Idle Condition Timer and the corresponding Idle control bit is accepted. Despite
this, the drive does not alter the internal power saving algorithms based upon this value.
Ÿ
Standby bit of one indicates that the target shall use the Standby Condition Timer to determine
the length of inactivity time to wait before entering the Standby condition. A standby bit of zero
indicates that the target shall not enter the Standby condition.
Ÿ
Standby Condition Timer field indicates the inactivity time in 100 millisecond increments that the
target shall wait before entering the Standby condition. The minimum allowable inactivity time is 60
minutes. Any value less than this is accepted, but will automatically default to 60 minutes.
Ultrastar 36LZX hard disk drive specifications
120