August 15, 2017
© Copyright IBM Corporation, 2017 Page 46 of 117
Status Code
’1B’
Status Text
‘Logical Volume Processing Error
XXX’
Probable Cause
The logical volume could not be processed because
an internal VTS/TS7700 error XXX was
encountered.
Code Functional Area
132 Physical volume processing
151 Physical volume processing
367 Migration processing
Call an IBM Service Representative. Error
XXX indicates the functional area within
the TS7700 which detected the internal
error.
Status Code
’20’
Status Text
‘Library Manager Error’
Probable Cause
The logical volume could not be exported because of
a library manager reported error during export
processing.
Call an IBM Service Representative.
Status Code
’21’
Status Text
‘Terminated - out of scratch’
Probable Cause
The logical volume could not be processed because
the operation was terminated after waiting 60 minutes
for a scratch stacked volume to be made available to
the TS7700.
1 Add scratch physical volumes to the
TS7700.
2. Retry the operation.
Status Code
‘26’
Status Text
‘Terminated, too few physical drives
available’
Probable Cause
The volume could not be processed because the
operation was terminated because the number of
available drives for each installed drive type was less
than four when the operation was initiated or became
fewer than four during the execution of the operation.
Call an IBM Service Representative
