August 15, 2017
© Copyright IBM Corporation, 2017 Page 32 of 117
This message is generated when the TS7700 has completed
processing for the specified secondary physical volume pool XX.
E0021 DB BACKUP WRITTEN TO STACKED VOLUMES,
PVOL01, PVOL02, PVOL03, PVOL04
(where: PVOL01, PVOL02, PVOL03, and PVOL04 are the physical
volumes the database backup was appended to)
This message is generated if the copy export acceleration
(LMTDBPVL) option was selected on the export.
None
E0022 EXPORT RECOVERY STARTED
The export operation has been interrupted by a TS7700 error or a
power off condition. When the TS7700 has been restarted, it will
attempt recovery of the operation.
None.
E0023 EXPORT RECOVERY COMPLETED
The recovery attempt for interruption of an export operation has
been completed.
Perform analysis of the Status
file on the Export List File
volume and reissue the Export
operation, if necessary.
E0024 XXXXXX LOGICAL VOLUME WITH INVALID COPY
ON LLLLLLLL
This message is generated when the TS7700 performing the export
operation has determined that one or more (XXXXXX) logical
volume (s) that are associated with the secondary storage pool
specified in the export list file do not have a valid copy resident on
the TS7700. The ‘LLLLLLLL’ field is replaced by the distributed
library name of the TS7700 performing the export operation. The
export operation continues with the valid copies.
When the export operation
completes, perform analysis of
the Status file on the Export List
File volume to determine the
logical volumes that were not
exported. Ensure that they have
completed their copy operations
and then perform another export
operation.
E0025 PHYSICAL VOLUME XXXXXX NOT EXPORTED,
PRIMARY COPY FOR YYYYYY UNAVAILABLE
This message is generated when the TS7700 detected a migrated-
state logical volume ‘YYYYYY’ with an unavailable primary copy.
The physical volume ‘XXXXXX’ on which the secondary copy of
the logical volume ‘YYYYYY’ is stored was not exported.
This message is added at code level R1.7.
The logical volume and the
physical volume will be eligible
for the next Copy Export
operation once the logical
volume is mounted and
demounted from the host.
An
operator intervention is also
posted.
E0026 DB BACKUP WRITTEN TO ALL OF STACKED
VOLUMES
This message is generated when copy export acceleration
(LMTDBPVL) option is NOT selected.
None
R0000 RECLAIM SUCCESSFUL FOR EXPORTED STACKED
VOLUME YYYYYY
This message is generated when the TS7700 has successfully
completed reclaim processing for an exported stacked volume
exported during a previous copy export operation.
The physical volume no longer
contains active data so it should
be returned to the library from its
offsite location for re-use after
the next copy export.
