![background image](http://html1.mh-extra.com/html/ibm/ts7650-protectier-deduplication-appliance/ts7650-protectier-deduplication-appliance_installation-roadmap-manual_4132400054.webp)
Power
®
connections
The tasks in this section describe the power connections for the components in a
TS7650 Appliance stand-alone configuration.
About this task
1.
Use Table 10 and Figure 14 on page 30 to verify the power connections made in
manufacturing.
Important:
v
The same label set is used to cable both the Appliance and the Gateway.
While server labels display the model as
DD4
(the server model for the
gateway), and
DD4
appears in this document in some tables and graphics,
interpret this label as
AP1
for Appliance installations.
v
All power connections from the TS7650 components to the PDUs were
completed in manufacturing.
v
TSSC power cable TJ5 might not be present in the ship group. If not, connect
the TSSC to the PDU by using only power cable BJ5.
v
SC P2 labels (
6
) are used only with TSSCs that use a second power cable.
Single power cable to Server DD4A
8
not used currently.
v
In the following diagrams, the letters
TJ
followed by a number (for example:
TJ5
) indicate which outlet the associated component plugs into on the
Top
PDU. The letters
BJ
followed by a number (for example:
BJ8
) indicate which
outlet the associated component plugs into on the
Bottom
PDU.
2.
Make any necessary adjustments to cable placement or labeling, then go to
“KVM switch, TSSC, and customer network connections” on page 31.
Table 10. Power cables for stand-alone and clustered configurations
Label
From
To
Remarks
1
Bottom PDU J10
Lower Ethernet switch
Not used for stand-alone
installation
2
Top PDU J10
Upper Ethernet switch
Not used for stand-alone
installation
3
Bottom PDU J4
System console (TSSC)
Ethernet switch
4
Top PDU J4
TSSC KVM assembly
5
Bottom PDU J5
System console, plug 1
6
Top PDU J5
System console, plug 2
Use dependent on
customer order
7
Bottom PDU J3
KVM Switch
8
Top PDU J8
DD4A P1
May be used in place of
10
in stand-alone
installations in which
the server is
customer-installed in the
frame.
9
Bottom PDU J8
DD4A P2
May be used in place of
12
in stand-alone
installations in which
the server is
customer-installed in the
frame.
28
IBM System Storage TS7650 ProtecTIER Deduplication Appliance: Installation Roadmap Guide
Summary of Contents for TS7650 PROTECTIER DEDUPLICATION APPLIANCE
