IBM TotalStorage DS4500, User Manual

Page: 41 / 122

2. Connect an LC-LC cable to an SFP module in the DS4500 Storage Server mini
hub. For instructions, see “Connecting an LC-LC Fibre Channel cable to an SFP
module” on page 6.
3. Remove the two protective caps from the LC connector end of the LC-SC cable,
as shown in Figure 13. Save the protective caps for future use.
4. Carefully insert one end of an LC-LC cable into the LC connector end of the
LC-SC cable. Push in the connector until it clicks into place.
5. Connect the SC connector end of the LC-SC cable to one of the following
devices:
v Optical interface connector on an IBM DS4000 Host Bus Adapter (Part
number 00N6881)
v
GBIC installed in a FAStT EXP500 storage expansion enclosure (Machine
type 3560)
v 1 Gb Fibre Channel switch (Machine type 2109)
v 1 Gb Fibre Channel managed hub (Machine type 3534)
Removing an LC-LC cable from an LC-SC cable adapter
To remove an LC-LC cable from an LC-SC cable adapter, perform the following
steps:
Figure 13. Removing the LC-SC cable adapter protective caps
Figure 14. LC-LC cable connected into the LC-SC cable adapter
Chapter 1. Introduction
11