IBM ThinkPad 760E Manual Download Page 168

Page: 168 / 331

Installing the DAA/Telephony Kit

Remove the metal port cover lock

, and remove the blank

port cover

from the lower portion.

Attention:
Make sure that any locking device is
unlocked.

Install the plug with the round receptacle that came with your
option kit. Firmly press it into the connector.

On the left side of the computer, install the port cover

with

the round opening that came with your option kit, and insert the
metal port cover lock

Close the keyboard.

150

IBM ThinkPad 760E, 760ED, or 760EL User's Guide

Summary of Contents for ThinkPad 760E












































































































































































































































































































































Search results

Summary of Contents for ThinkPad 760E

Reviews:

Related manuals for ThinkPad 760E

Brands by name

Popular brands

IBM ThinkPad 760E, Manual

Search results

Summary of Contents for ThinkPad 760E

Reviews:

Related manuals for ThinkPad 760E

Brands by name

Popular brands