IBM ThinkPad 760E, Manual

Page: 297 / 331

Advanced Information for PC Cards
Adding to the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers (which
make up the structured file of PC Card Director) must be registered in the
CONFIG.SYS file. These drivers are automatically registered in the
CONFIG.SYS file when you install PC Card Director following the
instructions in Chapter 7. The following shows each driver registered in the
CONFIG.SYS file and the standard rules.
Registered Drivers and Standard Rules for OS/2
O S / 2
The following is a sample of the CONFIG.SYS file for OS/2:
:
BASEDEV=PCMCIA.SYS ← Card Services
BASEDEV=ICRMU 1.SYS ← Resource Map Utility
BASEDEV=IBM2SS14.SYS ← Socket Services
(CardBus controller)
BASEDEV=IBM2SS 4.SYS ← Socket Services
(R2 PCIC controller)
BASEDEV=AUTODRV2.SYS ← Auto Configurator
DEVICE=C:\THINKPAD\VPCMCIA.SYS ← Virtual Card Services
:
DEVICE=C:\THINKPAD\xxxxxxx.SYS
: ↑ Storage card device driver
REM PC_Card_Client_Device_Driver
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS
↑ Power Management Support driver
Rule 1 Card Services, Resource Map Utility, and Socket Services must
be listed before any other PCMCIA drivers.
Rule 2 The Resource Map Utility is necessary only for OS/2 Version
2.1
x.
Rule 3 The PCMCIA Power Management Support driver must be listed
after all drivers, at the end of the CONFIG.SYS file.
Rule 4 When using storage cards, the device drivers must be installed
according to the card type:
Appendix B. Advanced Information for PC Cards
279