IBM ThinkPad 760E Manual Download Page 142

Page: 142 / 331

Installing and Removing PC Cards

Removing the PC Card

Attention:
Make sure the PC Card lock is
removed.

To remove PC Card lock:

Page 120.

Attention

Before removing such storage PC Cards as the hard disk PC
Card, flash memory PC Card, or SRAM PC Card from the PC
Card slot,

turn off the computer. Otherwise, data in the PC

Card may be corrupted or lost.

However, there is a safe way to remove the storage PC Card
without turning off the computer. See page 48.

Raise the PC Card eject button

for the PC Card you want to

remove. Then press the PC Card eject button and remove the PC
Card.

124

IBM ThinkPad 760E, 760ED, or 760EL User's Guide

Summary of Contents for ThinkPad 760E












































































































































































































































































































































Search results

Summary of Contents for ThinkPad 760E

Reviews:

Related manuals for ThinkPad 760E

Brands by name

Popular brands

IBM ThinkPad 760E, Manual

Search results

Summary of Contents for ThinkPad 760E

Reviews:

Related manuals for ThinkPad 760E

Brands by name

Popular brands