IBM ThinkPad 755CX User Manual Download Page 206

Page: 206 / 296

Installing the ThinkPad Display Driver

Note:
To shut down OS/2:

1. Move the mouse pointer to a

blank part of your OS/2
Desktop.

2. Press the right button of your

TrackPoint III or mouse.

3. Select Shut down.

Remove the diskette from the diskette drive and shut
down OS/2; then restart the system.

Open the OS/2 full screen, type DSPINSTL; then press
Enter.

Follow the instructions on the screen.

When you are asked to enter the source directory, do the

following:

– If OS/2 has been preinstalled on your computer, use

the default directory on the screen. Do not change it.

– If OS/2 has

not been preinstalled, enter A:\.

When you are asked to select the display type, select

Primary Display; then select Western Digital

WD90C24, C24A on ThinkPad for the LCD of the
computer.

When you are asked to select the monitor configuration,

select Install Using Defaults for Monitor Type and
follow the instruction.

When you are asked to overwrite the target file, select

Yes.

After the installation has been successfully completed,
remove the diskette; then shut down OS/2 and restart
the computer.

You have completed the installation of the display driver for OS/2.

190

IBM ThinkPad 755CX User's Guide

Summary of Contents for ThinkPad 755CX









































































































































































































































































































Search results

Summary of Contents for ThinkPad 755CX

Reviews:

Brands by name

Popular brands

IBM ThinkPad 755CX, User Manual

Search results

Summary of Contents for ThinkPad 755CX

Reviews:

Brands by name

Popular brands