IBM ThinkPad 600X? Manual Download Page 86

Page: 86 / 199

Attaching an external monitor

This section provides information about using the computer LCD
and an external monitor (CRT).

The LCD of your computer uses thin-film transistor (

TFT)

technology. The LCD displays output with XGA (1024 x 768
resolution) video mode and 16M colors.

If you are attaching an external monitor that supports a resolution
higher than VGA mode, you can achieve a maximum video
resolution of 1280 x 1024.

To attach an external monitor, do the following:

Power off the computer.

Connect the external monitor to the external-monitor

connector (

) on the rear of the computer; then connect

the monitor to an electrical outlet.

Power on the external monitor and the computer.

Start the ThinkPad Configuration program.

“ThinkPad Configuration program” on page 25.

IBM ThinkPad 600X User's Reference

Summary of Contents for ThinkPad 600X?








































































































































































































Search results

Summary of Contents for ThinkPad 600X?

Reviews:

Related manuals for ThinkPad 600X?

Brands by name

Popular brands

IBM ThinkPad 600X?, Manual

Search results

Summary of Contents for ThinkPad 600X?

Reviews:

Related manuals for ThinkPad 600X?

Brands by name

Popular brands